hi everebody,
i'm using jdcm to develop one print scu but, acording to Marco Eichelberg, and citing:
"
Seems like the developers of jdcm still need to do some homework.
There are at least three severe protocol violations in a single
message, the Basic Film Box N-CREATE-RQ which is rejected by the
print server:
1- The SCU tries to "re-use" the SOP Instance UID of the Basic Film Session
SOP instance for another object (the basic film box), which is illegal
2- The SCU sends a ReferencedImageBoxSequence in the N-CREATE-RQ which
actually contains a reference to the basic film session here and is
totally nonsense
3- The ReferencedSOPInstanceUID in the ReferencedPresentationLUTSequence
is empty, which is not allowed if this sequence is sent."
How i can resolve this problem?
PS:I now that this is not a jdcm forum but i am despaired ... Thanks in advance
Nepper
Print SCU Error!!!
Moderator: Moderator Team
-
- OFFIS DICOM Team
- Posts: 1446
- Joined: Tue, 2004-11-02, 17:22
- Location: Oldenburg, Germany
- Contact:
Thank you for the suggestion... :()
Nice suggestion,
but at this moment i think this problem is outdated... partially.
At this moment i have another problem with de dcmprint.
When i try to send a Basic Grayscale Image Box, acording to DICOM standard table H.4-10, the status of the N-SET response is 0x106.
Well all the fields have information
Image Position (2020,0010) M/M
Basic Grayscale Image Sequence (2020,0110) M/M
>Samples Per Pixel (0028,0002) M/M
>Photometric Interpretation (0028,0004) M/M
>Rows (0028,0010) M/M
>Columns (0028,0011) M/M
>Bits Allocated (0028,0100) M/M
>Bits Stored (0028,0101) M/M
>High Bit (0028,0102) M/M
>Pixel Representation (0028,0103) M/M
>Pixel Data (7FE0,0010) M/M
Except this
>Pixel Aspect Ratio (0028,0034) MC/M
(Required if the aspect ratio is
not 1\1))
How i can calculate this or retrieve the information??
Mit freundlichen Grüßen
Kind Regards
but at this moment i think this problem is outdated... partially.
At this moment i have another problem with de dcmprint.
When i try to send a Basic Grayscale Image Box, acording to DICOM standard table H.4-10, the status of the N-SET response is 0x106.
Well all the fields have information
Image Position (2020,0010) M/M
Basic Grayscale Image Sequence (2020,0110) M/M
>Samples Per Pixel (0028,0002) M/M
>Photometric Interpretation (0028,0004) M/M
>Rows (0028,0010) M/M
>Columns (0028,0011) M/M
>Bits Allocated (0028,0100) M/M
>Bits Stored (0028,0101) M/M
>High Bit (0028,0102) M/M
>Pixel Representation (0028,0103) M/M
>Pixel Data (7FE0,0010) M/M
Except this
>Pixel Aspect Ratio (0028,0034) MC/M
(Required if the aspect ratio is
not 1\1))
How i can calculate this or retrieve the information??
Mit freundlichen Grüßen
Kind Regards
-
- OFFIS DICOM Team
- Posts: 1446
- Joined: Tue, 2004-11-02, 17:22
- Location: Oldenburg, Germany
- Contact:
The rule with Pixel Aspect Ratio is that this element must either be absent (in which case the printer will assume square pixels) or present, and in this case contain the width-to-height ratio (see definition in DICOM part 3), which can be derived from the source image, where Pixel Aspect Ratio, Pixel Spacing or Imager Pixel Spacing will be present if pixels are not square.
Who is online
Users browsing this forum: No registered users and 1 guest