Hi Everyone,
I am trying to print a image using tcpprt and tcpsrv commands, what i need to know is , were should i configure my printer (hardware) parameters in the tcpsrv configuration file and what all parameters need to provided so that the
print SCP can build a communication with the printer, and print the images coming form the print SCU i.e tcpprt. Let me know the commands to print a image. I am using binaries provided with the DCMPRINT package for WIndows 32 machine.
Thanks
Santosh S B
Configuration File
Moderator: Moderator Team
Configuration File
Santosh S B
-
- OFFIS DICOM Team
- Posts: 1446
- Joined: Tue, 2004-11-02, 17:22
- Location: Oldenburg, Germany
- Contact:
The tcpsrv print server will essentially accept DICOM print jobs over the network (implementing the DICOM Print Management Service Class as an SCP) and will render the print jobs into PostScript files, one file for each print job. You just need to specify a command how to process PostScript files on your local system (and the implementation model assumes that you are using a PostScript printer - there is no support for Windows printer drivers, PCL, ESC/P or other printer languages). In tcpsrv.cfg, look for the section [Spool] - there is an entry named "Command"; by default, this is disabled (commented out). For Windows machines, it typically lookes like this:
where lpt1 is the printer you are spooling the PostScript code to (this may be a local printer or a network printer mounted with the NET USE command) and \f is replaced by the filename of the PostScript file when the command is actually executed by tcpsrv.
Code: Select all
Command = copy \f lpt1 /b
Hi Marco,
I used the following command lines at the SCP and SCU, its creating a .ps(postscript file) in the current directory but am not able to get a hard copy of the image through the printer.
The command lines are
>tcpprt_e.exe --auto 1 --target localhost:3100 1.2.392.200036.9116.2.2.2.1762447137.1034820914.973204.dcm
and
tcpsrv_e.exe -v -d -dhl
and have set the following in the tcpsrv.cfg
Command = copy \f HPLaserJet3055 /b
you mentioned in the last reply that there is no support for the windows drivers is it affecting the same. Let me know if there is any mistake in the command line for SCU and SCP, if there is a mistake then let me know the exact command line to use.
Thanks
Santosh
I used the following command lines at the SCP and SCU, its creating a .ps(postscript file) in the current directory but am not able to get a hard copy of the image through the printer.
The command lines are
>tcpprt_e.exe --auto 1 --target localhost:3100 1.2.392.200036.9116.2.2.2.1762447137.1034820914.973204.dcm
and
tcpsrv_e.exe -v -d -dhl
and have set the following in the tcpsrv.cfg
Command = copy \f HPLaserJet3055 /b
you mentioned in the last reply that there is no support for the windows drivers is it affecting the same. Let me know if there is any mistake in the command line for SCU and SCP, if there is a mistake then let me know the exact command line to use.
Thanks
Santosh
Santosh S B
Who is online
Users browsing this forum: No registered users and 1 guest