I would be grateful if someone could please shed some light on this issue for me please. The following movescu succeed but no images are stored in c:\test folder - similar command works for other dicom nodes:
movescu -v -S -k 0008,0052=STUDY -aet CARDIAC1 -aec NNUH_QR_SCP 10.145.92.230 105 -k 0020,000D=1.3.46.670589.99.6867753034126243893.13033096489130001585 -od c:\test --port 104
I: Requesting Association
I: Association Accepted (Max Send PDV: 64222)
I: Sending Move Request (MsgID 1)
I: Request Identifiers:
I:
I: # Dicom-Data-Set
I: # Used TransferSyntax: Little Endian Explicit
I: (0008,0052) CS [STUDY] # 6, 1 QueryRetrieveLevel
I: (0020,000d) UI [1.3.46.670589.99.6867753034126243893.13033096489130001585] # 58, 1 StudyInstanceUID
I:
I: Received Final Move Response (Success)
I: Releasing Association
movescu works but no images are stored
Moderator: Moderator Team
-
- DCMTK Developer
- Posts: 2051
- Joined: Fri, 2004-11-05, 13:47
- Location: Oldenburg, Germany
- Contact:
Re: movescu works but no images are stored
Hi,
either CARDIAC1 is not configured in the PACS to your IP address/port, or the selected study does not have any images. Use --debug option and post check/post the details of the C-MOVE response.
Best regards,
Michael
either CARDIAC1 is not configured in the PACS to your IP address/port, or the selected study does not have any images. Use --debug option and post check/post the details of the C-MOVE response.
Best regards,
Michael
Who is online
Users browsing this forum: Google [Bot], Majestic-12 [Bot] and 1 guest