Why the negotiateAssociation can not successful in dcmprscu?

[Dragonfly]

In my application, I want to print a image on a AGFA printer from a PC.
Firstly, I create a Stored Print object by the tookit of dcmpsprt. And then I want to print the image by AGFA printer. But the negotiateAssociation can not be successful. Could you help me? thanks!

[Marco Eichelberg]

A bit more detail would be helpful. "Something did not work, what's wrong" is not really sufficient information to help you in any way. Run dcmprscu with the --dump mode and check the output which will provide a detailed log of the A-ASSOCIATE-RSP message returned by the AGFA printer.

[Dragonfly]

I debug the codes of dcmtk-3.5.3. The association can not be created between the PC and the AGFA printer. When dcmprscu send the requestion of association to the printer, there is no response from the printer. I guess there are some error configrations in the file of dcmpstat.cfg. But I do not know how to modify it?

the parts of configuration in dcmpstat.cfg is following

[IHEFULL]
Aetitle = IHEFULL
Description = IHE Full Print SCP
Hostname = 222.194.174.10 //the IP address of the AGFA printer
Port = 104 // The port of the AGFA printer
Type = LOCALPRINTER

BorderDensity = 150\20\BLACK\WHITE
DisableNewVRs = false
DisplayFormat=1,1\1,2\2,2\2,3\3,3\3,4\3,5\4,4\4,5
EmptyImageDensity = 20\BLACK\WHITE
FilmDestination = MAGAZINE\PROCESSOR\BIN_1\BIN_2
FilmSizeID = 8INX10IN\10INX12IN\10INX14IN\11INX14IN\14INX14IN\14INX17IN\24CMX24CM\24CMX30CM
ImplicitOnly = false
MagnificationType = REPLICATE\BILINEAR\CUBIC\NONE
MaxDensity = 320
MaxPDU = 32768
MediumType = PAPER\CLEAR FILM\BLUE FILM
MinDensity = 20
OmitSOPClassUIDFromCreateResponse = false
PresentationLUTMatchRequired = false
PresentationLUTinFilmSession = false
ResolutionID = STANDARD\HIGH
SmoothingType = NONE
Supports12Bit = true
SupportsDecimateCrop = true
SupportsImageSize = true
SupportsPresentationLUT = true
SupportsTrim = true

[nicolasdicom]

Hi !

1 -Did you add [[COMMUNICATION]] at the top of your file ?
2- Are you sure that the printer is configured to receive connections from ANY AET ?

Lol ..These were my first troubles.

Regards

Nicolas