DICOM @ OFFIS

Thanks. I was looking at an older version of the documentation that only listed --no-halt (under -pdu) and not -nh, so I missed it.

Is is possible to prevent storescu from aborting association on "Store SCU Failed" when sending multiple files, so that only the 'bad' files are not sent, but ALL the good files get through? The default seems to be to abort on the first failure; so, some files are sent, but not necessarily...

Setting up a basic archive SCP using storescp.exe: Should I use +F (default) or -F? Why? Thanks.

C_ECHO attempts are still failing (see beginning of log below); so, we decided to try sending some images again: The association is accepted but the operation aborts anyway. Perhaps the log contains a clue as to why, but I don't see anything; maybe you can. Here is the storescp log, followed (after ...

I've downloaded v3.6. command: storescp.exe -d -pm +xa -od C:\test 50017 >> 50017.log Still Rejecting Association. A Google search on the entire output (copied below) yielded this link: http://forum.dcmtk.org/viewtopic.php?t=3156, , which suggests that maybe promiscuous mode could be a problem; so, ...

Yes. DCMTK (echoscu) to DCMTK (storescp) seems to work just fine. RADWORKS (C-ECHO) to DCMTK (storescp) fails. It's possible that there is something funny going on with the VPN, but I'm not sure how to isolate that other than to get the remote site to run storescp.exe on a PC and try RADWORKS C-ECHO...

Please see my previous post for my answer to your question. Following is a 'by the way' copy of the output from when I echoscu.exe -d 10.100.251.30 50017 from my desktop PC (the remote hospital uses a different local hostname which goes through one or more mappings via the VPN): PDU Type: Associate ...

I've been interfacing with one of their PACS administrators, who sent me a screen shot of RADWORKS2 that shows the connection Paramters tab in the Communication Properties window with the Host Name, DICOM AE Title, DICOM Port and a Test button, and a DICOM Connection Test Results window that says: &...

I tried searching with the above subject entry without success. I've used storescp on many occasions to allow other hospitals to send to me via a secure VPN. I've never had any significant problems until now. The remote hospital is using E-Film; once they were able to sneak something through (seemin...

I've tried the -v and -d options with storescp (MS windows command line): There is never ANY output. What am I doing wrong?