DICOM @ OFFIS

Discussion Forum for OFFIS DICOM Tools - For registration, send email with desired user name to the OFFIS DICOM team
It is currently Mon, 2018-05-28, 04:33

All times are UTC + 1 hour




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Thu, 2011-05-26, 14:44 
Offline

Joined: Wed, 2011-05-25, 19:25
Posts: 2
Location: Unterhaching
Since our last upgrade to release 12.1.5 from Service-Pack 4 to Service-Pack 5 our dcmprint is aborted with an System Message from the mri.
Is there somebody out with the same problem ?

DIMSE Command To Send:

# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 256 # 2, 1 CommandField
(0000,0110) US 2 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
(0000,1002) US 1 # 2, 1 EventTypeID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (130 bytes), presID=1
DIMSE Command Received:

# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0003) UI =PrinterSOPClass # 22, 1 RequestedSOPClassUID
(0000,0100) US 272 # 2, 1 CommandField
(0000,0110) US 0 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1001) UI =PrinterSOPInstance # 22, 1 RequestedSOPInstanceUID
(0000,1005) AT (2110,0030)\(0008,0070)\(0008,1090)\(0018,1000)\(0018,1020) # 20, 5 AttributeIdentifierList
DIMSE Command To Send:

# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33040 # 2, 1 CommandField
(0000,0120) US 0 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE sendDcmDataset: sending 84 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (118 bytes), presID=1
DIMSE Command Received:

# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 320 # 2, 1 CommandField
(0000,0110) US 1 # 2, 1 MessageID
(0000,0800) US 0 # 2, 1 DataSetType
(0000,1000) UI [2.16.124.113531.1.3.1.1303918635.18467] # 38, 1 AffectedSOPInstanceUID
DIMSE receiveFileData: 42 bytes read (last: YES)
DIMSE Command To Send:

# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33088 # 2, 1 CommandField
(0000,0120) US 1 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI [2.16.124.113531.1.3.1.1303918635.18467] # 38, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 128 bytes
DIMSE sendDcmDataset: sending 106 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (118 bytes), presID=1
DIMSE Command Received:

# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0002) UI =BasicFilmBoxSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 320 # 2, 1 CommandField
(0000,0110) US 2 # 2, 1 MessageID
(0000,0800) US 0 # 2, 1 DataSetType
(0000,1000) UI [2.16.124.113531.1.3.1.1303918647.6334] # 38, 1 AffectedSOPInstanceUID
DIMSE receiveFileData: 246 bytes read (last: YES)
DIMSE Command To Send:

# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =BasicFilmBoxSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33088 # 2, 1 CommandField
(0000,0120) US 2 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 257 # 2, 1 DataSetType
(0000,0900) US 272 # 2, 1 Status
(0000,1000) UI [2.16.124.113531.1.3.1.1303918647.6334] # 38, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 128 bytes
DIMSE receiveCommand
DIMSE Command To Send:

# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 256 # 2, 1 CommandField
(0000,0110) US 2 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
(0000,1002) US 1 # 2, 1 EventTypeID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (130 bytes), presID=1
DIMSE Command Received:

# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0003) UI =PrinterSOPClass # 22, 1 RequestedSOPClassUID
(0000,0100) US 272 # 2, 1 CommandField
(0000,0110) US 0 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1001) UI =PrinterSOPInstance # 22, 1 RequestedSOPInstanceUID
(0000,1005) AT (2110,0030)\(0008,0070)\(0008,1090)\(0018,1000)\(0018,1020) # 20, 5 AttributeIdentifierList
DIMSE Command To Send:

# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33040 # 2, 1 CommandField
(0000,0120) US 0 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE sendDcmDataset: sending 84 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (118 bytes), presID=1
DIMSE Command Received:

# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 320 # 2, 1 CommandField
(0000,0110) US 1 # 2, 1 MessageID
(0000,0800) US 0 # 2, 1 DataSetType
(0000,1000) UI [2.16.124.113531.1.3.1.1303918678.26500] # 38, 1 AffectedSOPInstanceUID
DIMSE receiveFileData: 42 bytes read (last: YES)
DIMSE Command To Send:

# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33088 # 2, 1 CommandField
(0000,0120) US 1 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI [2.16.124.113531.1.3.1.1303918678.26500] # 38, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 128 bytes
DIMSE sendDcmDataset: sending 106 bytes


--- the abort by the mri with severe system error ....


Top
 Profile  
 
 Post subject:
PostPosted: Wed, 2011-06-01, 10:05 
Offline
DCMTK Developer

Joined: Tue, 2011-05-03, 14:38
Posts: 1938
Location: Oldenburg, Germany
I'm sorry but I cannot see any reason for the abort in the log output. Did you use "tcpsrv" with --verbose, --debug and --dump?

However, it seems to me that the log output is not created for a single association but for two (or more)!? This is because the Message ID seems to be reused for multiple messages ...


Top
 Profile  
 
 Post subject:
PostPosted: Wed, 2011-06-08, 16:04 
Offline

Joined: Wed, 2011-05-25, 19:25
Posts: 2
Location: Unterhaching
I did the tcpsrv --verbose --debug --dump and got:
DIMSE Command To Send:

# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 256 # 2, 1 CommandField
(0000,0110) US 2 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
(0000,1002) US 1 # 2, 1 EventTypeID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (130 bytes), presID=1
DIMSE Command Received:

# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0003) UI =PrinterSOPClass # 22, 1 RequestedSOPClassUID
(0000,0100) US 272 # 2, 1 CommandField
(0000,0110) US 0 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1001) UI =PrinterSOPInstance # 22, 1 RequestedSOPInstanceUID
(0000,1005) AT (2110,0030)\(0008,0070)\(0008,1090)\(0018,1000)\(0018,1020) # 20, 5 AttributeIdentifierList
DIMSE Command To Send:

# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33040 # 2, 1 CommandField
(0000,0120) US 0 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE sendDcmDataset: sending 84 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (118 bytes), presID=1
DIMSE Command Received:

# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 320 # 2, 1 CommandField
(0000,0110) US 1 # 2, 1 MessageID
(0000,0800) US 0 # 2, 1 DataSetType
(0000,1000) UI [2.16.124.113531.1.3.1.1307120343.20485] # 38, 1 AffectedSOPInstanceUID
DIMSE receiveFileData: 42 bytes read (last: YES)
DIMSE Command To Send:

# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33088 # 2, 1 CommandField
(0000,0120) US 1 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI [2.16.124.113531.1.3.1.1307120343.20485] # 38, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 128 bytes
DIMSE sendDcmDataset: sending 106 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (118 bytes), presID=1
DIMSE Command Received:

# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0002) UI =BasicFilmBoxSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 320 # 2, 1 CommandField
(0000,0110) US 2 # 2, 1 MessageID
(0000,0800) US 0 # 2, 1 DataSetType
(0000,1000) UI [2.16.124.113531.1.3.1.1307120421.3093] # 38, 1 AffectedSOPInstanceUID
DIMSE receiveFileData: 226 bytes read (last: YES)
DIMSE Command To Send:

# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =BasicFilmBoxSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33088 # 2, 1 CommandField
(0000,0120) US 2 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 257 # 2, 1 DataSetType
(0000,0900) US 272 # 2, 1 Status
(0000,1000) UI [2.16.124.113531.1.3.1.1307120421.3093] # 38, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 128 bytes
DIMSE receiveCommand
DIMSE Command To Send:

# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 256 # 2, 1 CommandField
(0000,0110) US 2 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
(0000,1002) US 1 # 2, 1 EventTypeID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (130 bytes), presID=1
DIMSE Command Received:

# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0003) UI =PrinterSOPClass # 22, 1 RequestedSOPClassUID
(0000,0100) US 272 # 2, 1 CommandField
(0000,0110) US 0 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1001) UI =PrinterSOPInstance # 22, 1 RequestedSOPInstanceUID
(0000,1005) AT (2110,0030)\(0008,0070)\(0008,1090)\(0018,1000)\(0018,1020) # 20, 5 AttributeIdentifierList
DIMSE Command To Send:

# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33040 # 2, 1 CommandField
(0000,0120) US 0 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE sendDcmDataset: sending 84 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (118 bytes), presID=1
DIMSE Command Received:

# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 320 # 2, 1 CommandField
(0000,0110) US 1 # 2, 1 MessageID
(0000,0800) US 0 # 2, 1 DataSetType
(0000,1000) UI [2.16.124.113531.1.3.1.1307120452.14343] # 38, 1 AffectedSOPInstanceUID
DIMSE receiveFileData: 42 bytes read (last: YES)
DIMSE Command To Send:

# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33088 # 2, 1 CommandField
(0000,0120) US 1 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI [2.16.124.113531.1.3.1.1307120452.14343] # 38, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 128 bytes
DIMSE sendDcmDataset: sending 106 bytes
DIMSE receiveCommand


------------------------------------------------------------------
already the same. The two conncects are caused by: initial the mri justs
connects to the printscp to select the format etc.
The second is the real print command which aborts with a system error and as usual without any serious information: call philips...


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group