I had been using dmcqrti to look at studies just fine like this:
dcmqrti -c /etc/dcmtk/dcmqrscp.cfg impetus
Now, when I try to run the command I get the following output:
DcmQueryRetrieve: Warning: db does not exist: impetus
ti: no accessable databases.
Here are the lines from /etc/dcmtk/dcmqrscp.cfg:
----------------------------------------------------------------------------------
# Uncomment and adjust the following lines for a common r/rw storage area:
#READWRITE /var/lib/dcmtk/db/READWRITE RW (10, 1024mb) ANY
#READ /var/lib/dcmtk/db/READ R (200, 1024mb) ANY
impetus /archive/dicom_db RW (10, 1024mb) ANY
#
AETable END
-----------------------------------------------------------------------------------
Here's the output from ls:
drwxrwxrwx 3 dcmtk dcmtk 88 2007-01-08 12:28 dicom_db
Any ideas what has gone wrong?
database does not exist
Moderator: Moderator Team
-
- Posts: 1
- Joined: Tue, 2007-01-09, 00:34
database path
Hi,
Try to remove the underscore from the impetus's database path (like this : impetus /archive/dicomdb RW (10, 1024mb) ANY)...and it should be ok.
Regards
Try to remove the underscore from the impetus's database path (like this : impetus /archive/dicomdb RW (10, 1024mb) ANY)...and it should be ok.
Regards
-
- Posts: 3
- Joined: Mon, 2006-11-20, 18:49
Who is online
Users browsing this forum: Bing [Bot] and 1 guest