I am sending DICOM images to another location using the storescu command line tool. The images transfer correctly but the transfer takes a very long time even for a single image (approx 2-3 minutes). When I execute the following command:
D:\dcmtkTools\bin>storescu -d -aet srcAEF -aec destAEF 192.168.0.10 104 fileToSend
Request Parameters:
Our Implementation Class UID: 1.2.276.0.7230010.3.0.3.5.3
Our Implementation Version Name: OFFIS_DCMTK_353
Their Implementation Class UID:
Their Implementation Version Name:
Application Context Name: 1.2.840.10008.3.1.1.1
Calling Application Name: srcAEF
Called Application Name: destAEF
Responding Application Name: resp AP Title
Our Max PDU Receive Size: 16384
Their Max PDU Receive Size: 0
Presentation Contexts:
Context ID: 1 (Proposed)
Abstract Syntax: =AmbulatoryECGWaveformStorage
Proposed SCP/SCU Role: Default
Accepted SCP/SCU Role: Default
Proposed Transfer Syntax(es):
=LittleEndianExplicit
.
. (Many more of these contexts, I removed them since there where so many.
.
Requested Extended Negotiation: none
Accepted Extended Negotiation: none
Constructing Associate RQ PDU
(VERY LONG DELAY HERE)
PDU Type: Associate Accept PDU Length: 3222
Only dumping 512 bytes
02 00 00 00 0c 90 00 01 00 00 72 63
.
.
(Followed by a lot more output, but everything works from this point down and things happen very quickly)
What am I missing. I have tried adjusting the length of the PDU. That has not help.
Any advice or ideas would be apperciated.
Thanks,
Mitch
storescu slow, Constructing Associate RQ PDU
Moderator: Moderator Team
-
- ICSMED DICOM Services
- Posts: 2217
- Joined: Fri, 2004-10-29, 21:38
- Location: Oldenburg, Germany
See FAQ #19.
Who is online
Users browsing this forum: No registered users and 1 guest