Since our last upgrade to release 12.1.5 from Service-Pack 4 to Service-Pack 5 our dcmprint is aborted with an System Message from the mri.
Is there somebody out with the same problem ?
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 256 # 2, 1 CommandField
(0000,0110) US 2 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
(0000,1002) US 1 # 2, 1 EventTypeID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (130 bytes), presID=1
DIMSE Command Received:
# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0003) UI =PrinterSOPClass # 22, 1 RequestedSOPClassUID
(0000,0100) US 272 # 2, 1 CommandField
(0000,0110) US 0 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1001) UI =PrinterSOPInstance # 22, 1 RequestedSOPInstanceUID
(0000,1005) AT (2110,0030)\(0008,0070)\(0008,1090)\(0018,1000)\(0018,1020) # 20, 5 AttributeIdentifierList
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33040 # 2, 1 CommandField
(0000,0120) US 0 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE sendDcmDataset: sending 84 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (118 bytes), presID=1
DIMSE Command Received:
# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 320 # 2, 1 CommandField
(0000,0110) US 1 # 2, 1 MessageID
(0000,0800) US 0 # 2, 1 DataSetType
(0000,1000) UI [2.16.124.113531.1.3.1.1303918635.18467] # 38, 1 AffectedSOPInstanceUID
DIMSE receiveFileData: 42 bytes read (last: YES)
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33088 # 2, 1 CommandField
(0000,0120) US 1 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI [2.16.124.113531.1.3.1.1303918635.18467] # 38, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 128 bytes
DIMSE sendDcmDataset: sending 106 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (118 bytes), presID=1
DIMSE Command Received:
# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0002) UI =BasicFilmBoxSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 320 # 2, 1 CommandField
(0000,0110) US 2 # 2, 1 MessageID
(0000,0800) US 0 # 2, 1 DataSetType
(0000,1000) UI [2.16.124.113531.1.3.1.1303918647.6334] # 38, 1 AffectedSOPInstanceUID
DIMSE receiveFileData: 246 bytes read (last: YES)
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =BasicFilmBoxSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33088 # 2, 1 CommandField
(0000,0120) US 2 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 257 # 2, 1 DataSetType
(0000,0900) US 272 # 2, 1 Status
(0000,1000) UI [2.16.124.113531.1.3.1.1303918647.6334] # 38, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 128 bytes
DIMSE receiveCommand
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 256 # 2, 1 CommandField
(0000,0110) US 2 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
(0000,1002) US 1 # 2, 1 EventTypeID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (130 bytes), presID=1
DIMSE Command Received:
# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0003) UI =PrinterSOPClass # 22, 1 RequestedSOPClassUID
(0000,0100) US 272 # 2, 1 CommandField
(0000,0110) US 0 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1001) UI =PrinterSOPInstance # 22, 1 RequestedSOPInstanceUID
(0000,1005) AT (2110,0030)\(0008,0070)\(0008,1090)\(0018,1000)\(0018,1020) # 20, 5 AttributeIdentifierList
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33040 # 2, 1 CommandField
(0000,0120) US 0 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE sendDcmDataset: sending 84 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (118 bytes), presID=1
DIMSE Command Received:
# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 320 # 2, 1 CommandField
(0000,0110) US 1 # 2, 1 MessageID
(0000,0800) US 0 # 2, 1 DataSetType
(0000,1000) UI [2.16.124.113531.1.3.1.1303918678.26500] # 38, 1 AffectedSOPInstanceUID
DIMSE receiveFileData: 42 bytes read (last: YES)
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33088 # 2, 1 CommandField
(0000,0120) US 1 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI [2.16.124.113531.1.3.1.1303918678.26500] # 38, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 128 bytes
DIMSE sendDcmDataset: sending 106 bytes
--- the abort by the mri with severe system error ....
Philips MRI Software Upgrade
Moderator: Moderator Team
-
- Posts: 2
- Joined: Wed, 2011-05-25, 19:25
- Location: Unterhaching
-
- DCMTK Developer
- Posts: 2541
- Joined: Tue, 2011-05-03, 14:38
- Location: Oldenburg, Germany
- Contact:
I'm sorry but I cannot see any reason for the abort in the log output. Did you use "tcpsrv" with --verbose, --debug and --dump?
However, it seems to me that the log output is not created for a single association but for two (or more)!? This is because the Message ID seems to be reused for multiple messages ...
However, it seems to me that the log output is not created for a single association but for two (or more)!? This is because the Message ID seems to be reused for multiple messages ...
-
- Posts: 2
- Joined: Wed, 2011-05-25, 19:25
- Location: Unterhaching
I did the tcpsrv --verbose --debug --dump and got:
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 256 # 2, 1 CommandField
(0000,0110) US 2 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
(0000,1002) US 1 # 2, 1 EventTypeID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (130 bytes), presID=1
DIMSE Command Received:
# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0003) UI =PrinterSOPClass # 22, 1 RequestedSOPClassUID
(0000,0100) US 272 # 2, 1 CommandField
(0000,0110) US 0 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1001) UI =PrinterSOPInstance # 22, 1 RequestedSOPInstanceUID
(0000,1005) AT (2110,0030)\(0008,0070)\(0008,1090)\(0018,1000)\(0018,1020) # 20, 5 AttributeIdentifierList
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33040 # 2, 1 CommandField
(0000,0120) US 0 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE sendDcmDataset: sending 84 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (118 bytes), presID=1
DIMSE Command Received:
# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 320 # 2, 1 CommandField
(0000,0110) US 1 # 2, 1 MessageID
(0000,0800) US 0 # 2, 1 DataSetType
(0000,1000) UI [2.16.124.113531.1.3.1.1307120343.20485] # 38, 1 AffectedSOPInstanceUID
DIMSE receiveFileData: 42 bytes read (last: YES)
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33088 # 2, 1 CommandField
(0000,0120) US 1 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI [2.16.124.113531.1.3.1.1307120343.20485] # 38, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 128 bytes
DIMSE sendDcmDataset: sending 106 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (118 bytes), presID=1
DIMSE Command Received:
# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0002) UI =BasicFilmBoxSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 320 # 2, 1 CommandField
(0000,0110) US 2 # 2, 1 MessageID
(0000,0800) US 0 # 2, 1 DataSetType
(0000,1000) UI [2.16.124.113531.1.3.1.1307120421.3093] # 38, 1 AffectedSOPInstanceUID
DIMSE receiveFileData: 226 bytes read (last: YES)
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =BasicFilmBoxSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33088 # 2, 1 CommandField
(0000,0120) US 2 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 257 # 2, 1 DataSetType
(0000,0900) US 272 # 2, 1 Status
(0000,1000) UI [2.16.124.113531.1.3.1.1307120421.3093] # 38, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 128 bytes
DIMSE receiveCommand
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 256 # 2, 1 CommandField
(0000,0110) US 2 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
(0000,1002) US 1 # 2, 1 EventTypeID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (130 bytes), presID=1
DIMSE Command Received:
# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0003) UI =PrinterSOPClass # 22, 1 RequestedSOPClassUID
(0000,0100) US 272 # 2, 1 CommandField
(0000,0110) US 0 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1001) UI =PrinterSOPInstance # 22, 1 RequestedSOPInstanceUID
(0000,1005) AT (2110,0030)\(0008,0070)\(0008,1090)\(0018,1000)\(0018,1020) # 20, 5 AttributeIdentifierList
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33040 # 2, 1 CommandField
(0000,0120) US 0 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE sendDcmDataset: sending 84 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (118 bytes), presID=1
DIMSE Command Received:
# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 320 # 2, 1 CommandField
(0000,0110) US 1 # 2, 1 MessageID
(0000,0800) US 0 # 2, 1 DataSetType
(0000,1000) UI [2.16.124.113531.1.3.1.1307120452.14343] # 38, 1 AffectedSOPInstanceUID
DIMSE receiveFileData: 42 bytes read (last: YES)
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33088 # 2, 1 CommandField
(0000,0120) US 1 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI [2.16.124.113531.1.3.1.1307120452.14343] # 38, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 128 bytes
DIMSE sendDcmDataset: sending 106 bytes
DIMSE receiveCommand
------------------------------------------------------------------
already the same. The two conncects are caused by: initial the mri justs
connects to the printscp to select the format etc.
The second is the real print command which aborts with a system error and as usual without any serious information: call philips...
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 256 # 2, 1 CommandField
(0000,0110) US 2 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
(0000,1002) US 1 # 2, 1 EventTypeID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (130 bytes), presID=1
DIMSE Command Received:
# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0003) UI =PrinterSOPClass # 22, 1 RequestedSOPClassUID
(0000,0100) US 272 # 2, 1 CommandField
(0000,0110) US 0 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1001) UI =PrinterSOPInstance # 22, 1 RequestedSOPInstanceUID
(0000,1005) AT (2110,0030)\(0008,0070)\(0008,1090)\(0018,1000)\(0018,1020) # 20, 5 AttributeIdentifierList
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33040 # 2, 1 CommandField
(0000,0120) US 0 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE sendDcmDataset: sending 84 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (118 bytes), presID=1
DIMSE Command Received:
# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 320 # 2, 1 CommandField
(0000,0110) US 1 # 2, 1 MessageID
(0000,0800) US 0 # 2, 1 DataSetType
(0000,1000) UI [2.16.124.113531.1.3.1.1307120343.20485] # 38, 1 AffectedSOPInstanceUID
DIMSE receiveFileData: 42 bytes read (last: YES)
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33088 # 2, 1 CommandField
(0000,0120) US 1 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI [2.16.124.113531.1.3.1.1307120343.20485] # 38, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 128 bytes
DIMSE sendDcmDataset: sending 106 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (118 bytes), presID=1
DIMSE Command Received:
# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0002) UI =BasicFilmBoxSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 320 # 2, 1 CommandField
(0000,0110) US 2 # 2, 1 MessageID
(0000,0800) US 0 # 2, 1 DataSetType
(0000,1000) UI [2.16.124.113531.1.3.1.1307120421.3093] # 38, 1 AffectedSOPInstanceUID
DIMSE receiveFileData: 226 bytes read (last: YES)
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =BasicFilmBoxSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33088 # 2, 1 CommandField
(0000,0120) US 2 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 257 # 2, 1 DataSetType
(0000,0900) US 272 # 2, 1 Status
(0000,1000) UI [2.16.124.113531.1.3.1.1307120421.3093] # 38, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 128 bytes
DIMSE receiveCommand
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 256 # 2, 1 CommandField
(0000,0110) US 2 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
(0000,1002) US 1 # 2, 1 EventTypeID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (130 bytes), presID=1
DIMSE Command Received:
# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0003) UI =PrinterSOPClass # 22, 1 RequestedSOPClassUID
(0000,0100) US 272 # 2, 1 CommandField
(0000,0110) US 0 # 2, 1 MessageID
(0000,0800) US 257 # 2, 1 DataSetType
(0000,1001) UI =PrinterSOPInstance # 22, 1 RequestedSOPInstanceUID
(0000,1005) AT (2110,0030)\(0008,0070)\(0008,1090)\(0018,1000)\(0018,1020) # 20, 5 AttributeIdentifierList
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =PrinterSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33040 # 2, 1 CommandField
(0000,0120) US 0 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI =PrinterSOPInstance # 22, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 112 bytes
DIMSE sendDcmDataset: sending 84 bytes
DIMSE receiveCommand
DIMSE receiveCommand: 1 pdv's (118 bytes), presID=1
DIMSE Command Received:
# Dicom-Data-Set
# Used TransferSyntax: LittleEndianImplicit
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 320 # 2, 1 CommandField
(0000,0110) US 1 # 2, 1 MessageID
(0000,0800) US 0 # 2, 1 DataSetType
(0000,1000) UI [2.16.124.113531.1.3.1.1307120452.14343] # 38, 1 AffectedSOPInstanceUID
DIMSE receiveFileData: 42 bytes read (last: YES)
DIMSE Command To Send:
# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0000,0000) UL 0 # 4, 1 CommandGroupLength
(0000,0002) UI =BasicFilmSessionSOPClass # 22, 1 AffectedSOPClassUID
(0000,0100) US 33088 # 2, 1 CommandField
(0000,0120) US 1 # 2, 1 MessageIDBeingRespondedTo
(0000,0800) US 1 # 2, 1 DataSetType
(0000,0900) US 0 # 2, 1 Status
(0000,1000) UI [2.16.124.113531.1.3.1.1307120452.14343] # 38, 1 AffectedSOPInstanceUID
DIMSE sendDcmDataset: sending 128 bytes
DIMSE sendDcmDataset: sending 106 bytes
DIMSE receiveCommand
------------------------------------------------------------------
already the same. The two conncects are caused by: initial the mri justs
connects to the printscp to select the format etc.
The second is the real print command which aborts with a system error and as usual without any serious information: call philips...
Who is online
Users browsing this forum: No registered users and 0 guests