movescu: UnknownTransferSyntax/Query level not specified

[Rudo]

With movescu i've got the following problem:

movescu -v --study --port 9876 --move SPIEGEL_GH --call EAJMH01 192.168.222.50 104 -k 0020,000D=1.3.51.0.1.1.10.11.0.174.20690743.11111

Code: Select all

Requesting Association
Association Accepted (Max Send PDV: 16372)
================================
Sending query
Move SCU RQ: MsgID 1
Request:

# Dicom-Data-Set
# Used TransferSyntax: UnknownTransferSyntax
(0020,000d) UI [1.3.51.0.1.1.10.11.0.174.20690743.11111] #  40, 1 StudyInstanceUID
C-Move RSP: MsgID: 1 [Status=Unknown Status: 0x120]
  AffectedSOPClassUID: =MOVEStudyRootQueryRetrieveInformationModel
  Data Set: Not Present
Releasing Association

GE-PACS log:

Code: Select all

2012-10-08 02:02:14.347: <I> [CS,SCP-62296:1261] EAJMH01: Received association request from AE-Title MOVESCU
2012-10-08 02:02:14.347: <I> [CS,SCP-62296:1263] Connecting to archive ARCH1
2012-10-08 02:02:14.347: <W> [CS,SCP-62296:1552] Query level not specified
2012-10-08 02:02:14.472: <A> [CS,SCP-62296:3160] Trail: 2012-10-08 02:02:32.222 2012-10-08 02:02:32.340 ARCH1 MOVESCU 288 100 178 33 0
2012-10-08 02:02:14.472: <I> [CS,SCP-62296:0549] C_MOVE request from MOVESCU was handled in 125 ms

Why does the GE Pacs speak about "Query level not specified" as I use the --study option?
What's about the "# Used TransferSyntax: UnknownTransferSyntax" error messages?
EAJMH01 knows about SPIEGEL_GH.

regards
rudo

[J. Riesmeier]

Why does the GE Pacs speak about "Query level not specified" as I use the --study option?

The --study option only selects the SOP class, but since the Study Root Q/R Information Model support three different Q/R levels, you also have to specify it with another -k or --key option.

What's about the "# Used TransferSyntax: UnknownTransferSyntax" error messages?

That's not an error message but a comment (that you can ignore).

[Rudo]

Why does the GE Pacs speak about "Query level not specified" as I use the --study option?

The --study option only selects the SOP class, but since the Study Root Q/R Information Model support three different Q/R levels, you also have to specify it with another -k or --key option.

Thank you for your helpful reply.

movescu -v --study --port 9876 --move SPIEGEL_GH --call EAJMH01 192.168.222.50 104 -k 0020,000D=1.3.51.0.1.1.10.11.0.174.20690743.11111 -k 0008,0052=STUDY

starts a successfull c-move EAJMH01->SPIEGEL_GH

regards
rudo